Email Marketing Tutorial | HubSpot Marketing Hub

Posted on February 1, 2025 by Jose

According to multiple studies, the ROI for email marketing, comes out to be anywhere between $36 to $40 for every dollar spent. So email is an important part of your marketing strategy, but here’s a secret. Its success largely lies in how well you’re able to craft your email campaigns. So look smart, mind your emojis, and let’s figure out how to build an email in HubSpot. So how do you use the HubSpot email tool to really create those engaging pieces of content that delight your audience?

Start by navigating to the marketing dropdown menu and then selecting email.

This is gonna redirect you directly into your email tool. Now, let most Marketing Hub features, the marketing email tool in HubSpot is broken into a series of tabs. The first one is managed, which you can think about as your organizational overview in terms of what’s happening internally on this channel. So, what is currently being drafted and worked on by your team?

What’s currently scheduled to go out to your various audience segments? And then what’s ultimately already been sent, in terms of campaign, or promotional efforts to your audiences that you can now start to analyze so you can learn what to improve for the next send.

Then you have the analyze tab. Now the analyze tab is interesting because, when it comes to evaluating your email marketing as a channel, this is going to be the best overview possible with really powerful out of the box reporting. So through the lens of email recipient engagement and deliverability metrics, you can start to get a sense of how well this channel is really driving momentum when you think about lead nurturing, lead acquisition and conversion metrics and how that’s contributing to the overall strategy and the overall marketing success you’re seeing on your team.

Now, you can always go on to create new dashboards that show you custom splices of data, but when it comes to just getting a sense overall how well a channel is performing, I cannot recommend these analyzed tabs enough because they’re really going to be strong insights that are given to you right out of the box.

In addition to the analyze tab, we have the health tab. Now, the health tab is interesting because it shows you from an optimization standpoint where you may need to be leaning into to ensure that you are hitting your contacts inbox every single time. What’s interesting here is you can set benchmarks against HubSpot data or even industry benchmarks, to see where you could be optimizing for so you can improve your health and your score over time.

Now, back on the manage tab, maybe we see that it’s time to build a new email.

How do you actually do that in HubSpot? To do so, navigate to the create email button all the way to the right, and then if you have business units enabled on your HubSpot account, just make sure that you’re associating this email with the correct business unit. And then we see the three types of emails that are available to us in HubSpot. You have regular, which I like to think about as those single send emails that are just associated with the campaign. Then you have your automated emails.

Now these are the emails that you’re going to be really leveraging when it comes to your workflows and any nurturing campaigns you’re building if you have professional or enterprise. These are also going to be the automated emails that you’re using in the automation tabs on tools like forms to really just give a quick follow up to a signup form, for example, and helping to nurture in a one-time way your new contacts to your database.

Then you have your blog emails. Now, blog emails are essentially an offshoot of automated emails, but essentially they’re going to be sent to your blog subscribers anytime that you have a new blog post that’s published. So they’re really just going to be associated with your blogs.

In that case, but they’re going to send anytime that you publish new content. Now for the sake of this example, we’re actually going to look at regular email, and once you select the type of email that you want to send, you’ll be redirected to this template page. On the custom area, you’ll see any of the templates you’ve downloaded from the template marketplace. You’ll also see anything that’s been designed custom for you if you have potentially a designer that’s created custom assets for your marketing team. And then you have this drag and drop option.

Now, this is my favorite option because your girl is not good at HTML or CSS and drag and drop templates are going to be the most surefire way to make sure that you can without much coding expertise, really create highly interactive formatted emails that are going to render correctly without having to worry about padding or specific coding instructions.

So, it’s going to give you the most flexibility as a marketer to create the emails that you want to look a certain way, without having to mess with the coding or the templated code that comes with each of your custom templates. So let’s click on one to just explore it a little more. So, once we click on the template, we’re redirected into the editor and this is where some of the magic starts to happen. So, in a drag and drop template, we can take any of the content options or content formats we see on the left-hand side and essentially drag and drop them to reformat our email, to have and contain in its layout those new elements to again completely redesign our email to fit our exact content needs without any coding necessary.

What’s really interesting is this is actually where you start to see some of the AI features start to really play out in your email.

So for example, we just dragged an image over into our email template and our preview on the right hand side, if we click generate, it’s going to actually give you the email generation tool. So say we are a plant subscription service and we want to, I dunno, have a really fun plant picture show up in our email on the left hand side. And then we would choose an AI style that we can use to really set the tone with our specific image and then click generate.

And maybe we like this top one on the left-hand side, seems fun.

Clicking inserts, we’ll bring it into our template and voila, we have our custom abstract potted plant.

In addition to this option, you can actually highlight any of the texts that you enter here and use AI, the content assistant features to essentially rewrite, expand, shorten, or even change the tone. So maybe we have some templated introduction that we just wanna make a little bit more heartfelt. Clicking our AI assistant, we can actually just have it quickly rewritten and inserted into our email so that we’re not spending so much time worrying about if this tone hits right, we just got custom text all ready to use. In addition to using some of the AI features to create those really fun and potentially heartfelt messages, we highly recommend that you think deeply about and how you could be using your CRM data here to do a lot of the heavy lifting for you.

So for example, in our email template here, maybe we see this option, it says, dear friend, but we know that we’re storing most of our first names on our contact records and we want to make it just a little bit more personal by adding in the name. What we can do is click personalize to bring that data in, so that where every time that a contact is receiving this information and we know the first name, they’re seeing their first name generate in their email rather than just friend.

Now, once we’re done creating our finely drafted email, we can actually navigate to our settings tab. Now our settings tabs going to also be where a lot of the behind-the-scenes goodness happens because it’s going to be where we set the sender that this email is coming from, our subject line. Again, you can use personalization tokens here.

So, if you wanted to say the first name to get people’s attention, you could use any of that contact information.

The only thing to consider here is, you wanna personalize without being creepy. So just finding that balance is key. But say we wanna do hey first name, potentially even add an emoji that feels tropical. So after adding your subject line, you can also start to think about how you are updating any preview text or setting the correct subscription type to make sure that this is only aligning with people that have subscribed to certain email messages.
And again, just customizing some of those additional things like which campaign this email will be associated with.

Moving onto the send or schedule tab, this is going to be where you set the recipients that this email goes to and doesn’t go to. So this is going to be a dropdown menu that allows you to select the exact lists that should be receiving this email. So in this case, we’ve got a really big list that has a lot of leads. This is also going to be where you start to think deeply about who you shouldn’t be sending this email for.

You know, different segments of your audience are going to be better aligned with certain promotional efforts or content offerings than others.

So here you can get really critical about which contacts actually shouldn’t be receiving this because it doesn’t necessarily align with their jobs to be done or their persona. So you can think about who doesn’t get this email. At the same time as you’re thinking about who is going to benefit most from this email? In this area, you’ll also see the option to schedule for later.

Now, this is going to be particularly important, if you don’t winna send out your email immediately. So maybe you have a campaign that’s launching on a specific day and you want to make sure that this email goes out on that day. You can designate the exact day or time that you want this to go out, and then here you can make sure that if you’re sending this across multiple time zones, that it’s hitting your contact’s inbox in their time zone at this specific time so that it can be a great way to optimize.

If you may be worried about sending out emails that might be outside of working hours or may not be taking into account certain time zones. Great way to optimize automatically there.

Finally, you have this automation tab. Now this automation tab is a little bit more simple than the total automation that you would expect in your workflows tool. Here you’re really just trying to do simple actions as a response to how someone may be engaging in your email. So for example, say someone clicks a specific link in our email, we may want to add them to a specific list as a hyper-engaged contact. Maybe for example, we have an additional email that could really resonate with people that are excited on our clicking links in this particular email.

There’s a couple of actions that are worth exploring here.

Most of them have to do with re-engagement and nurturing, based on how people are responding to this exact email. So don’t let this automation tab go to waste because it can do really strong actions to make sure that you are nurturing and continuing to engage with the people that are taking certain actions on this particular email. Once you’re done setting up your automation, click review and schedule. Now this is going to just give you that overview of what’s happening in your email.

Again, we’re gonna see things like the options that we’ve set in our settings tab as well as our recipients tab and maybe some potential areas of optimization, when it comes to how we’re naming our list. But once you’re done really reviewing what’s happening here, you can go ahead and schedule or even just preview, how this is going to render across certain devices or clients just to again, make sure that it’s going to get received in a way that you would expect and there’s no last minute surprises. So that is like a whole bunch of tools, but they’re all available to you in HubSpot’s Marketing Hub and it’s so easy to just get started.

https://hop.clickbank.net/?affiliate=aff61bz25k&vendor=soundhealr&pid=indexwrittenheal&tid=aff61bz25k

https://hop.clickbank.net/?affiliate=aff61bz25k&vendor=manifmagic&pid=article3

 

 

 

 
Posted in Email marketing | Tagged , , , , , , , | Leave a comment

The Story Recap Before Black Ops 6 (In 15 Minutes)

Posted on February 1, 2025 by Jose

The Black Ops Universe has a twisted and complex story, but I’m going to break it down and help. You understand the entire Black Ops story line before Black Ops 6 in under 15 minutes. So you know everything leading up to the brand new Black Ops 6 campaign. From World War II to 1991, let’s dive right into the Black Ops story. The Black Ops story line begins during World War II as depicted in Call of Duty world at war with Soviet soldiers, Demitri penko and Victor rnof, leading campaigns to reclaim Stalingrad and storm Berlin. Ending World War II in Europe, though resov and fenko, were healed as Heroes of the Soviet Union.

The Soviet Union’s post-war strategy shifted to creating weapons to confront the United States rather than glorifying old war heroes in the aftermath of World War II in October of 1945. Soviet officer, Nikita dragovic, is tasked with capturing a Nazi scientist named Frederick Steiner, who has developed a new bioweapon called Nova 6. A staple of the Black Op games moving forward alongside dragovic is his new brutal, Lieutenant Lev kenko, dragovich and kenko end up leading a squad of former Soviet Heroes, including rnof and petrano, to capture Steiner in his new chemical creation. After a series of battles, resof Squad captures a German ship loaded with Nova 6, but dragovich betrays them using patranco as a test subject for the new bioweapon and tries to use the new bioweapon on Victor rnav as well rnav narrowly escapes as British SAS and Russian Forces begin fighting over the Nova freighter and ultimately he blows up this ship, so no one can get their hands on Nova 6 as he runs through the Arctic.

He is later captured by Soviet forces and imprisoned in the vuda gulg Branded a traitor. We then move forward many years to 1961 the events of Call of Duty, Black Ops, begin with CIA operative Alex Mason, who, alongside Frank Woods and Jo Bowman, is assigned to assassinate Fidel Castro during the Bay of Pigs invasion. After a mission into Fidel Castro’s compound, Alex Mason seemingly kills Fidel Castro as a team plans to make their escape by plane, Alex Mason sacrifices himself. So he can clear the runway for his team to escape safely, ultimately ending up in his own, knocking out and captur. Once captured and coming to, it turns out Mason killed a body double and he was captured by the real Castro. Mason is then handed over to dragovich as a gesture of Goodwill between Russia and Cuba and their future relations for the next two years, dragovich and Stein. Subject: Mason to a Soviet brainwashing program known as the numbers program, a mind, control program developed by the Soviets themselves, designed to turn him into a sleeper agent like many before him, however, Mason resists the full effects of the program and is sent to the vuda gulock, Where he meets Victor rnof rnof, who knows about Nova 6, becomes Mason’s mentor and uses reverse brainwashing techniques to protect him from the numbers program. Seemingly saving Alex bason and convincing him to subscribe to my channel for all of your Call of Duty.

Information like you, should do right now, together, Mason and resov, the new Buddies plan and execute a prison bre, but while Mason escapes RoR rnof sacrifices himself, ensuring Alex Mason’s Freedom by late 1963, Alex Mason was back with the CIA and personally briefed by President John F Kennedy for a dangerous mission to stop a Soviet rocket launch. However, during the meeting with Kennedy, Mason experiences the hallucination of himself assassinating the president, an effect of the numbers program he was subjected to in Russia soon after Mason woods and Bowman infiltrate. A Russian space facility ran by Le kenko and tried to prevent the launch of the soy 2 rocket, which could give the Soviets an upper hand in the Space Race.

They save a captor in Forant, Gregori Weaver, but the rocket launches before they can stop it. Mason ends up successfully, shooting it down with the portable launcher and they fail to capture Le keno, frustrating Mason Upon returning to the United States, Alex Mason heads to Dallas and is photographed around JFK the day. He was assassinated as well as hearing a numbers command that tells him information about the details of how John F Kennedy was assassinated, ining that Mason himself may have killed JFK. We move forward to 1968 with Mason and his team heading to Vietnam during the Ted offensive to reconnect with woods and their new CIA Handler Jason Hudson. The group is tasked with finding evidence of a Soviet plot involving Nova 6 and the numbers program in Vietnam, which dragovich, kenko and Steiner are still pursuing after intense battles in Vietnam, including the defense of keson, and a search for a Russian informant.

Who turns out to be Victor rnof Alex Mason and his new MC SOG team work to try to stop this new Soviet plot. Mason ends up working alongside rnav once again, who mysteriously disappears and reappears throughout these missions. Parallel to Mason’s efforts, CIA operatives, Russell Adler and Lawrence Sims search for the loose of Soviet agent Perseus and Vietnam Perseus is helping the Viet Kong and their Mission uncovers proof of Soviet involvement in Vietnam. In the following days, the United States shoots down a Soviet plane carrying Nova 6, leading to a confrontation with dragovich and kenko, and the mcy sog team led by Alex Mason Mason and his comrades fall into enemy hands and in one of the series most iconic scenes. They are forced to play a deadly game of Russian lurette. Joseph bman refuses to participate and is brutally killed by a Soviet officer, while woods and Mason manag to break free.

They end up seeking revenge for Billy, Bowman’s death and killing the Soviet officer who killed Bowman. They end up stealing a Soviet helicopter and use it to destroy enemy base throughout all of Vietnam before landing at a Russian base. At the exact same time as the events in Vietnam Hudson and the now fully recovered gregori Weaver hunt down a rogue chemist named Daniel Clark in Hong Kong, who informs the two that he helped stabilize Nova 6 for use and before he can tell them about the Numbers program he is shot in the head. The story builds towards Mason’s confrontation, with cenko Alex bason, finding a p camp where keno is located, frees the prisoners and in doing so also frees Roar roof and during a fierce battle. Wood seemingly sacrifices himself by tackling Cenko out of a window, just as he pulls up pins on a handful of grenades.

Both men are believed to have died, but unbeknownst to Mason, keno and Woods would both survive with Rav’s help Alex Mason now escapes now, driven by a desire to find the remaining members of dragon’s group. We then cut to Russia. Hudson Weaver and a CIA Strike Team lead an assault on Mount Yamal thanks to a tip they received from Daniel Clark after clearing the base and starting an avalanche. Hudson and Weaver are contacted by styr who informs them that he wishes to stop helping Russia and start helping the CIA, because dragovich is planning on killing him. Now that Nova and the numbers program are complete, he tells them to meet him at re re, Birth, Island and as the team escapes an avalanche buries Mount yamal hiding its Secrets until it is unburied in the future. The Pinnacle of the story culminates on rebirth Island, where Mason and rnof hunt down Steiner an engineer of Nova, 6 and creator of the numbers program.

Mason and rnof battled through Soviet forces to confront Steiner and when they finally reach him rnav ex sacks. His revenge on the other side of the island. Hudson and Weaver lead an assault alongside Russell Adler and Lawrence Sims to capture intelligence and save Frederick seimer. So he can inform them of dragovic’s plan. Ultimately, Hudson and weer fail witnessing Alex Mason killed, killing siner, proclaiming that he was Victor rnof on the other side of the island. Adler looks to get information as he tortures a high-ranking Soviet officer and ultimately cuts out his eye as revenge for Weaver losing his eye to kenko to Soviet soldiers. Many years ago, in the final stages of Black Ops, Mason is interrogated on February 25th. 1968. About his past and why he killed Steiner, he insists it was Victor roof only to learn that roof has been dead for years and never physically accompanied him. At any point past, his initial Escape flashbacks reveal Roar roof, brainwashed Mason, leading him a Target, Dr keno and Steiner as revenge for him, killing Demitri Penko and betraying Victor resow in the end of World War II.

Hudson his interrogator demands Mason decipher the mysterious number sequence which are tied to Dragovic’s, commands and Mason. Finally, realizes the numbers are linked to his failed brainwashing and are a command set for sleeper agents in every major city in the United States who plan to set off Nova 6 gas bombs. He also remembers the broadcast. Point of these numbers is a ship outside of Cuba called the Rula the next day on February 26th. Mason and Hudson need an assault to stop the Nova 6 gas detonation after bailing from a damaged helicopter. They discover the real number station is in fact not in the rotula but underwater after swimming to the station and battling through enemies. Mason shuts down the broadcast of the numbers program and Dragovich confronts him with Hudson’s helps Mason drowns, Dragovich. Finally, ending his Reign.

They escaped the collapsing underwater station and are greeted by the US Navy, with Mason hearing roof voice congratulating him on killing the three Traders in the Years following Frank, Woods was transfer between P camps and Vietnam until he escaped in 1972 returning to work for the CIA. Alongside Alex, Mason, Alex Mason in 1979, ended up getting married and had a son named David in January 1981, President Ronald Reagan formed a CIA team led by Russell Adler, including Jason, Hudson, Frank Woods, Alex Mason and others to resolve the Iranian hostage crisis. Their first mission was to track down two Iranian leaders: Kasim Javadi and Arash Kadivar and after interrogating Kassim in Amsterdam. They discovered Kadar’s location is in Turkey.

The team intercepts them at an airport where they witness Kadivar, execute a couple of men in a vehicle for seemingly no reason. Mason then has the opportunity to take a sniper shot but ends up missing. This results in a firefight and kadavar tries to take off in his plane down the runway. After blowing up kadar’s plane, kadavar reveals information about a Soviet spy Perseus before Adler executes him revealing Perseus is still alive and did not in fact die during Vietnam. In February of 1981, we were then introduced to Bell a new member of the CIA team who served in Vietnam with Russell Adler and laurren. Sim team set their sites on Anton vov, a Russian arms dealer linked to Percy after tracking down one of volkov’s subordinates. France, CLA B Tres Claus’s apartment, where bell plants a bug, and after doing so he is knocked out and captured, but later rescued by the CIA strikes and after the rescue they eventually corner and capture. Anton vov, following Anton volkov’s capture Intel leads the team to a Soviet complex in Ukraine, where woods and Bell discover a mock American Town used to train Soviet soldiers inside they discover operation Greenlight on a Russian computer. Greenlight is a US program involving nuclear bombs, plays throughout many European cities and one of which has been stolen by the rogue agent pereus. Tensions rise as Adler confront Hudson about the secret program and it being the real reason why the team was assembled which results in woods punching. Hudson alther, realizes a stolen bomb could make the United States Global Enemy Number One if Perseus detonates it in March of 1981. Mason and Woods head to Yow to recover a Soviet Mainframe linked to Perseus and the numbers program with the help of KGB Insider Demitri, Bykov, Mason and Woods retrieve the Mainframe.

The data contains information on sleeper Agents from the Dragovich numbers program but is too corrupted to be fully useful. So, the CIA team plans an infiltration of the Lubyanka building in Moscow to recover the uncorrupted list and upon Bellos leaving Aller and Bell into the Lubyanka building. They start a full fire fight on their way out to escape the Lubyanka building, with the list of sleeper Agents from the numbers program ultimately escaping in a vehicle thanks to Lazar. The CIA Strike Team then travels to Cuba, where they track down a sleeper agent by the name of Hastings involved in perseus’s plan to use the nuclear bond from operation Greenlight. It’S then in the dying moments of Hastings that he reveals he reversed engineer the Solen nuke. So that Perseus could set off all of the Green Knight Lukes simultaneously a firefight ensues and the team suffers casualties B is forced to leave Lazar behind, as he escapes via Skyhook, instead opting to save Helen Park and take her with him after the failed mission incuba, an injured Bell, is taken back to the CIA safe house, where Adler subjects him to intense interrogation and mind control, forcing Bell to recall their Vietnam experiences and memory.

It’s revealed that these are false memories implanted after he was injured when Kadivar shot him earlier. In the campaign at the Airfield in Turkey, Bell was in fact previously a peruses operative brainwashed by Adler to assist the CIA. He was controlled by Adler using the trigger phrase. We’Ve got a j job to do. Despite this, Bell reveals Perseus’s plans, detonating green, like NES from Solovetskiye island with reg’s approval. The CIA assembles a naval task force to stop percuss. The team infiltrates sole ski destroys anti-aircraft defenses and prevents the activation of nukes by bombing the island Bells entered in the bombing. But the operation succeeds, and, in the end, Adler takes Bell to a Cliffs side, where he cryptically thanks Bell for a sacrifice before drawing his pistol.

The screen Fades to black as Bill meets his fate at Adler’s hands. After the events of the Black Ops, Cold War campaign Alex Bas and Frank Woods trying to stop the Menendez drug cartel by killing their leader Jose Menendez in 1991, but not killing his son, allowing 19-year-old rule Menendez to escape following the operation to stop percuss in the Menendez cartel Al Mason decided to retire from service choosing to go, live in Alaska with his son and wife and live the idola retired life in 1984. Victor Stitch Kusman the Soviet officer tortured by Adler during the CIA’s 1968 assault on rebirth Island, takes over as the leader of Perseus.

Using his experience in Nova 6 Stitch, then captures and brainwashes Adler turning him into a pawn for Perseus. While Aller is held captive, Stitch’s agents steal the numbers protocol data from Yow, destroying it with a small KNE uke upon leaving ultimately ending the story of yawn Stitch.

Then starts spreading a brainwashing signal across the world that activates his Dragovic sleeper agents, Adler, fights back against his brainwashing detonating World War II bombs throughout Verdan to stop Stitch’s broadcast before being recaptured by the CIA. Amid this Alex Mason’s wife dies leaving him devastated. He returns to the CIA to help Adler, despite leaving his son David to cope alone with woods and Hudson and Mason’s help Adler regains control of his mind and in the final en counter Stitch, reveals that the original peers are dead before Adler kills him, though his Sleeper cells and Legacy remain active after the events of Stitch’s broadcast and Adler’s return. Alex Bas retires again to raise his son Adler undergo evaluation for brainwashing, while Frank Woods returns to the field and in 1986 woods and his team are captured, hunting down the now Gunrunner rule Menendez son of Jose Menendez.

This prompts Jason Hudon to call Alex Mason for help which angers David Mason David still affected by his father’s previous absence. After his mother’s death is sent to stay with Hudson’s family as Alex accepts the mission to rescue wood, Alex Mason, then head to Africa to assist unito forces in exchange for information on Frank Woods After helping repel an enemy attack, Mason learns Woods is on a nearby Barge he and Hudson rush to rescue him, but are shot down and forced to fight through the enemies on the bar. They find Woods malnourished but alive and surrounded by the bodies of his teammates, which are decomposing as they escape Mason shoots down an attacking helicopter and the barge runs ground near an enemy camp.

There they encounter armed Smuggler, Raul, Menendez Mason ends up shooting out Raul’s eye, injuring him in a standoff and then returns to Hudson and woods, fighting to the Shoreline before being rescued by unau forces after saving Woods, Mason reenlisted, the CIA once again in September of 1986, He is sent alongside Frank Woods to Afghanistan to Aid the bad Hadin against the Soviet invasion secret. Upon arrival, the Muad Haden leader doubts their ability, but Soviet forces attack forcing Mason and Woods to defend the camp on Horseback, destroying tanks and helicopter. A massive Soviet assault arrives and Mason defeats lever trans bowling up his tank Furious over his past imprisonment during the interrogation of keno and after keno States.

There’s a mo. in the CIA. Woods kills keno.

The mad Hadin then betrays the CIA almost immediately, leaving Mason Hudson and woods stranded in the desert. Mason hallucinating sees Victor rnof who helps save him and his team. We then moov forward a few months and Nora general of the Panamanian military and the CIA team up to capture ra Menendez, while Menendez sits with his sister yosina Panamanian soldiers, attack and raged. Menendez kills an officer but is subdued later Nora, frees him, but Menendez attacks.

Nora upon hearing Yosef’s cries fueled by rage, Menendez fights through the village to save her, but a grenade accidentally kills Yosana. We then cut to 15 minutes earlier Woods, Mason and Hudson attempt to capture minds while fighting their way through the compound Mason and Woods find a document about a mole in the CIA and woods. Seeks Vengeance for his teammates in Africa inside menendez’s mansion Woods loses control, causing grenade to bounce into yosef’s room killing her the mission ends with Menendez seemingly dead and Hudson telling the team today never happened. We then move forward to December 19th. 1989. Frank Woods and Alex Mason were brief about capturing Manuel Nora during the US invasion of Panama, and they successfully capture Nora, but Hudson reveals he will be traded for another prisoner Menendez at the exchange.

Woods is ordered to shoot a hugged figure believing it to be Menendez. He fires only to discover he has shot. Mason Furious Woods tries to kill Nora but Menendez ambushes. Him shooting off his kneecap. Woods then, awakens to find Mason dead, Hudson tied up and David Mason under menendez’s control, Menendez forces Hudson to choose who dies Hudson then sacrifices himself to save woods and David and Menendez kills him leaving Woods alive to suffer as he departs Menendez taunts David saying he Will one day seek revent? We then move forward to the year 1990. A few months have passed since the deaths of Alex Mason and Jason. Hudson and after a thorough investigation, the deputy director of the CIA Daniel Livingstone determines the mole responsible for the Chain Reaction.

Where Woods was tricked into shooting Basin and causing Hudson’s death was in fact Russell Adler and puts out a Most Wanted Target on his back. But we do know at the start of Black Ops 6. He is, in fact, in the Middle East, doing something to try and stop the mystery group Pantheon, leaving you with everything you need to know about the Black Ops franchise before Black Ops 6. Also make sure you subscribe, because I have a video coming out tomorrow.

Talking about everything you need to know about the villain of Black Ops, 6 Pantheon, and until next time I am icebergs your Call of Duty informant stay frosty.

FREE Gift #3 : The EMF Sound Shield
https://hop.clickbank.net/?affiliate=aff61bz25k&vendor=soundhealr&pid=gift4&tid=aff61bz25k

Accidental SEOAI Magic StudioEasyTrafficBot/a>
Posted in Story | Tagged , , , , , , , | Leave a comment

How To Generate Traffic To Your Website – Organic Free traffic with video

Posted on February 1, 2025 by Jose

Do you need to generate leads for your online business, but you just don’t know how. Well, by the end of this video you will have my surefire way for generating leads free online with YouTube. And for the best advice on how to escape the rat race with an online business, subscribe to my channel and hit the bell notification so you are notified each time I upload a video on Thursday. And don’t forget to check out my blog where I have dozens of articles and videos on how you can escape the rat race and how you can develop a successful online business. You’ll find that linked in the upper left.

OK so let’s get on to it, it’s actually a four-step process that we’re going to go over for generating leads for your online business, for getting traffic to your website. So what’s number one? Number one is creating videos and putting them up on YouTube.

I suggest YouTube, there are other options but understand that YouTube is the second largest search engine second to Google which owns YouTube, so I think it’s probably the best place to put your videos. Now what could you create videos on?

Well, you could do how-to, tutorials related to your business niche. You could do reviews of different products, different things.

There’s endless things that you could do videos on but those are just a couple of ideas that you can start creating videos for and putting them up on YouTube to generate leads for your website. Number two, become an expert at getting people to see your videos. Now this is a huge topic and we’re not going to spend a lot of time with it here.

I have made some other videos on this topic and lots of others have too. There are also some great, relatively inexpensive paid courses. I can make some suggestions if you want to contact me and get some information on that, but there’s lots of information that’s even free out there on YouTube and other places on how you can get people to see your content.

The important thing, it doesn’t have to be Hollywood quality, but it does need to be good information that people see is helpful and it does need to be entertaining enough so that people stay with it. Okay so number three, what is number three?

And that’s to offer additional value at the end of your video you’re going to make an offer probably for some free content. What could this be? It could be a free consult, it could be how-to videos, maybe even a series of videos. It could be an e-book lots of people have a free ebook that they give out or some sort of PDF checklist that they can get to help them accomplish some of the things that they want to accomplish. And what you’re getting in exchange for this is their email address, so that you can continue to communicate with them and continue to develop the relationship.

Okay so that’s number three, that is to offer additional value. And just a quick question for you. What kind of offer do you like best as free value when you see things like this? What do you like? Do you like to see an e-book, do you like to see a video series, consult?

What other types of things do you like to see? Let me know in the comments below. Okay, and finally we get to the last step, number four.

And that’s to maintain a relationship with your email list. You’ve got them on your email list now and you need to maintain that relationship.

You need to send them emails with additional content, maybe additional videos, additional blog articles. Again there’s an endless amount of things that you can do. But you need to be communicating with them and you need to be giving them some free value. And then every so often, occasionally when you have something to sell, you pitch your product as well. But you have now developed a relationship with these people, so they’re much more likely to know you, to like you, and to trust you.

And when you have people that you know like and trust, you’re much more likely to take their recommendations, even buy from them than somebody that you have just seen once in a video or just seen once in an email. Okay, so the last one, maintain a relationship with your email list with additional free value.

So now you know how to get leads, you know how to get them for free, you know how to get traffic to your website with YouTube videos. But maybe you don’t even know which niche, which type of business that you want to get involved with yet. Or maybe you actually even know how to get some leads, but you don’t know how to convert those into sales.

Well, I have developed a four-day video training that answers those questions and a lot more. and you can access that with the first link in the description below this video. Also, if you want to join a community of like-minded individuals who are escaping the rat race with highly successful online businesses, a group where we share tips and strategies and and all sorts of things related to having a successful online business, you can join the Facebook group that’s linked again in the description below. Okay that’s the four steps, what’s next? Well, check out these videos to learn more about leads and sales and escaping the rat race.

If you liked the video don’t forget to hit the like button and also subscribe to my channel and share this with your friends. Thank you very much, and we’ll see you on the next video!

https://tl2icashmailer.com/?rid=54877

The Top 10 Books To ‘Power Up’ Your Email Marketing
https://www.emailmarketingheroes.com/whats-the-most-effective-way-to-nurture-leads-through-email/
Posted in Website | Tagged , , , , | Leave a comment

How To Create Your First Wireframe (Video Guide)

Posted on January 31, 2025 by Jose

Hey, I’m Jeff head of UX design here at Career Foundry today I’ll talk, you through, very important aspect of the UX design, process wireframes I’ll start by explaining exactly what wireframe is and why it’s so useful, then we’ll take a look at the wire framing process and. Show you how to create your own sound Goodlet’s. Do it. So, what exactly is a wireframe puts imply?

It’s a two-dimensional!

Drawing of a page’s interface. Imagine you’re a designing mobile app. You would need to create wireframes for each screen that the user moves through when using at a wireframe is used to define and plan the information hierarchy on a page or screening other words: how should the items in the pabebe organized what content goes where how should space be allocated and What functionalities are available this includes positioning elements, such as buttons menus and headings?

How do you work out the information hierarchy for your wireframe well?

This is a pin on how you want the user to process, the information on the page and this will be, based on your user research.

It’s important to note that a wireframe is a very simple blueprint of. What the final product will look like it inessentially. A black-and-white diagram. There’s no need to include any styling, color or graphics. Wireframe can be hand drawn a simple pin, endpaper affair, or it can be digital, but more on that later wireframes are really helpful for a number of reasons. Above all else, they allow you to, organize your ideas and get clarity and how the final product should be laid out.

They also help to ensure consistency throughout the user interface, as you’ll determine how certain types of information should be displayed on every scree it’s important to have layout and functionality clear before you start adding things like colorant fonts. These can be distracting so wireframes are that necessary, in-between step without althea bells and whistles wire framing is also great way of getting to know how the user interacts, with your interface, if the user can’t easily navigate their way around a plain hand-drawn diagram of your site. When something needs to be fit.

It’s important, to iron out these kinks before you start actually building out the product, once you’ve done your competitor analysis and conducted the initial user research, you’re ready to start hatching ideas, you might start by sketching out ideas. In their roughest form exploring different avenues you might take with this particular product once. You’ve redefined your ideas and the start to take shape, you’re ready to move on to proper wireframes before we get started on thewier framing process.

Let’s take a look at some different types of wireframes. Your brother of different methods of producing your wireframeshand-drawn wireframes can be created with pen and paper or on a whiteboard. These are handy, forgetting your designs down quickly and there. Also super easy to edit drawing your wireframes by hand can be a good way to keep things basic and resist the temptation to get lost in unnecessary details once you’re happy with your hand-drawn wireframes you’ll switch to digital wire framing to create digital. Wireframes you’ll need a wire framing tool or software.

There are plenty out there, to choose from so if you’re new to the field just do, a search of the most popular wire framing tools you’ll, be pretty spoiled for choice. The good thing about digital wire framing is that it allows you to keep track of the progress of your wireframes and to document certain decisions you make along the way and, of course, digital wireframes are easier to share ready to create your.

First, wireframe let’s go before you start designing your own wireframes get inspired take a look at some examples of wireframes for a similar product to the one, you’re designing most decent portfolios will contain wireframes so browse through sites like Dribble and Belance to see. What other designers have done? You don’t need to spend ages on this. It’s just a nice way, to get into the groove and start generating ideas. Okay, so you’re feeling inspired. Now you need to create the building blocks of your wireframe I suggest starting by hand so grab a big thick marker pen and a stash of paper at this stage you need to be asking the following: questions what are the intended user and business goals when interacting with this page in otherwards?

What does the user want to achieve and? What actions does the business want? The user to complete? This could be something like adding an item to a shopping cart, for example, how can you organize the content to support these goals? Which information should be more prominent and what buttons or touch points. Does the user need in order to complete the desired actions?

This in turn will get you thinking about what your main message and logo should go and what the users should see first when they land on the page. You’ll also need to consider where to place your call-to-action and finally to think about user expectations. What dosa user expect to see on certain areas of the page remember right now, you’re, just drawing out the building blocks the bare bones so keep it. Simple once you’ve got the foundation in place. It’s time to fill in the details. My advice would be work from top to bottom then left to right. So, what kind of details do you need to fill in at this? Stage you need to define usability conventions such as putting, the navigation at the top next to your logo, and maybe placing a search box in the top right corner.

For example, you also need to think about spacing layout and information.

Hierarchy what information is most and least important what. Are your calls to action, for example, if you’re building an e-commerce app your CTA? Maybe a button with the text Add to Cart next think about. What images you want to include, where you want to include them and what size they should beknow throughout the entire wired framing process there are three big boxes.

You should be looking to, tick, clarity, user confidence and simplicity what. Do we mean by clarity your wireframe needs to make it clear as to what page is depicting and, what the user can do? Does a layout of the page satisfy the user needs? Can the user easily complete their desired actions without too much thought user confidence is all about building trust in your brand for good design. What does this have to do with wire framing well ease of navigation and clear calls to action make sure that the product interface is predictable and comfortable.

If your page is unpredictable with buttons and boxes in unexpected places, user confidence will rapidly sync when creating your wireframe use, familiar navigational processes, and place buttons and commonly use intuitive positions simplicity is all about keeping out the noise or. Creating your wireframes avoid information overload, excessive content links and buttons, cane really overwhelming and distracting for the user and ultimately makes it difficult for them to achieve their goals. The user journey should be as smooth and seamless as possible so really think carefully when deciding what needs need to be included on each screen.

Remember wireframes are not about pretty colors and aesthetics, they’re about, intuitive and logical, layout and good information hierarchy. So, keep this in focus at all times before, converting your hand-drawnwireframes into digital format. You might wish to get feedback on your work so far. If you’ve got the time and resources. Consider conducting some quick usability tests to highlight any big flaws. That you might have missed, as I mentioned before, there are countless digital wire, framing tools out there so spend a bit of time experimenting and finding one.

You like I personally, like balsamic as it limits you and keeps you from adding too many colors and details. Most tools offer free tutorials and plenty of guidance, so you’ll get to grips with-it in no time we’re designing an app or a website you will create a wireframe for each screen, or page, eventually ending up the complete set of wireframes to test your wireframes you’ll turn them into prototypes. This can also be done. With the help of special software, which essentially turns your wireframes into a clickable mock-upyou’ll, then conduct user testing to see how the user interacts with your design, identifying any bugs flaws or blind spots.

However, that’s a topic for another day now you know where wireframes, why it’s so important and how to get started creating your own.

https://hop.clickbank.net/?affiliate=aff61bz25k&vendor=manifmagic&tid=aff61bz25k

Accidental SEOAI Magic StudioEasyTrafficBot/a>
Posted in Software | Tagged , , , | Leave a comment

How to Fix Can’t Open JPG Files Issues on Windows 10/11?

Posted on January 31, 2025 by Jose

Hi guys I’m dan and welcome back to WondershareRepairit professional software to fix corrupted photos and videos we’re back with another videoland today we’re discussing different ways: tooled jpeg files on your windows, computer that have become unresponsive, there’s a few reasons why jpeg files might not load even when you’re using a Different photo viewer, so, if you’re having trouble, learning jpeg, file son windows, computers make sure you watch this video through to the end as we’ll cover a few different ways to solve this problem but before we get into the video make sure you hit that subscribe button down, below for more videos, just Like this now what can cause jpeg files not to load on windows, computers, usually file?

Corruption is the major factor behind why. You can’t open jpeg files, but there are some additional factors that may also restrict you from loading jpegs.

The photo viewer you’re using might be outdated. Keep in mind that software publishers don’t continue to support outdated versions of their software, so make sure you’ve updated your photo viewer to the latest version speaking of the photo viewer. It’s also possible that.

The application itself might be broken or malfunctioning. This normally happens when the program wasn’t installed correctly or there are misconfigured installation files, another reason why, jpeg files might not load could be unexpected errors during saving. For example, if your system crashes, while you’re halfway through saving a file that, can cause the file to be unresponsive, and not open on your system. Finally, the presence of malware or viruses can also prevent jpegs from loading. If your computer remains connected to the internet 24 7 there’s a chance, you might have, downloaded malware.

Unintentionally which is now corrupting your personal data since.

There are multiple factors that can cause jpegs not to load we’ll have to try a few different solutions to fix the problems. Try these methods, one by Oneto, find one that works for you. The first thing to try is updating your windows photo viewer to the latest version.

Available one of the most common causes of jpegs not loading properly in windows, 10 or 11 Isan outdated, photo viewer so before anything else make sure your photo viewer is updated to. The latest version available.

Here’s how you can update the photo viewer on your system firstly click on the start, icon and choose settings in the settings. Menu click, update and security and choose check for updates if your photo viewer shows as needing an update click install update. If updating the photo viewer doesn’t solve the problem another thing we can, try is loading the jpeg in a different photo. Viewer you can install several third-party photo editors on your system, including adobe Photoshop lightroom picas and more once you’ve downloaded and installed a new photo viewer.

From the, Microsoft, app store right clicks on your file select open with and choose your new photo viewer if.

You still can’t load the jpeg file, it’s most likely that it’s saved incorrectly if. This is the case. We can simply rename the file and save it with another extension before.

We try that make sure you create a separate copy of the file, so you don’t lose the original version just in case this method doesn’t work. Now that we’ve created a copy let’s change the file, extension to, jpeg or png, and try opening it. Hopefully that fixes the problem but.

If your photos still won’t load it’s time to do some advanced repairs, we recommend using wonder share repair, Ita, fully fledged media repair tool, designed to fix, corrupted photos and videos. It doesn’t matter whether malware or athird-party application has corrupted the file repair. It can resolve the issue in three easy steps. The tool automatically scans the file and runs different troubleshooting methods to resolve the issue. Even if the files are seriously broken repair, it can resolve the issue.

 

Let me show you how it works. Firstly, install and launch Wondershare Repair it on your computer and select photo repair from the left hand, menu click, the add button and load your damaged, jpeg files, once the files are successfully loaded, click, the repair button at the bottom right corner the tool.

Will automatically start, repairing your jpeg images once.

The process completes click, the preview button next to each image to make sure it looks, okay, finally, click the save all button at the bottom right hand, cornetto save these repaired images on your system, adjust like that, your photos are repaired and youkan load them in any photo viewer that You like that brings us to the end of this video on how-to fix jpeg files that won’t load. If this video helped, you make sure you give it a thumb up and share this video with others and make sure you hit that subscribe button down below and ring the bell icon for more videos, just like this in future, I’m dan and I’ll see you next time.

https://hop.clickbank.net/?affiliate=aff61bz25k&vendor=crstorevip&tid=aff61bz25k&pid=indexvs
Posted in Software | Tagged , , , , | Leave a comment